Near-Infrared Sauna Therapy — A Key Biohack for Health

Sauna therapy is one of my absolute favorite biohacks, as it provides so many crucial health benefits. I detailed many of them in “The Stunning Health Benefits of Sauna Therapy,” so I won’t dive too deep into that here.

Instead, this discussion with repeat guest Brian Richards, founder of SaunaSpace, will focus on the differences between traditional Finnish saunas, conventional infrared saunas and near-infrared saunas, and why near-infrared exposure is so important.

Traditional Finnish saunas are wood lined rooms with heaters filled with rocks over which water may be poured. The basis of the traditional Finnish sauna, which has been extensively studied, is a room that has a heater of some sort that can reach air temperatures of 170 degrees Fahrenheit. The next-gen infrared saunas that SaunaSpace produces include high amounts of near-infrared, which provides benefits you can’t get from a conventional sauna or even far-infrared sauna.

The first near-infrared electric sauna was invented in 1891, shortly after the advent of the incandescent light bulb in 1887. Dr. John Harvey Kellogg invented what’s called the electric incandescent light bath. He used a Victorian style cabinet decked out with an array of incandescent light bulbs.

He knew there was something special about the light, and was convinced it might produce a better sauna. Today, scientists have confirmed the photobiomodulation benefits Kellogg intuited.

The Drawbacks of Most Commercial Saunas

For all its benefits, a downside of the traditional Finnish sauna is that it offers little or no clinically insignificant amounts of infrared exposure. Richards explains:

“The sun is 43% near-infrared, and from a photons-per-second perspective, it’s like 70% photons per second of near-infrared. So, if you’re not somewhere close to that, you’re not in that ancestral context of what’s biologically relevant and what we’ve evolved to get. There is a little bit from these lower energy infrared sources, but not nearly what you get from the incandescent bulb.”

Another problem with conventional electrical sauna heaters is the presence of electromagnetic fields (EMFs), especially electric fields. Electric fields in any unsealed wiring are significant, and when you’re talking about an electrical heater that uses 20 or 30 amps, that’s a lot of voltage in an unshielded scenario.

Electric fields travel through water, humidity and air, which is why they’re so pervasive in homes. When these fields reach your body, they increase your body’s voltage. Most far-infrared saunas are also plagued by high EMF.

“In my personal testing of those, they all tend to be high electric field and high magnetic field, especially how you sit in those,” Richards says. “Your back is usually a very close proximity to the ceramic heater itself. You’re within that magnetic field. Then, without using shielded technology, you are exposing yourself to electric fields — both in the Finnish electric hot rock sauna, and in the traditional far infrared sauna.”

‘EMF-Free’ Is Usually a Lie

If you’ve been shopping for a sauna, you’ve probably come across some that claim to be low-EMF or EMF-free. However, this is a half-truth at best. While many sauna makers have effectively mitigated the magnetic fields, bringing them within biologically reasonable levels, they’ve not mitigated the electric fields.

“I’ve measured many brands over time, and you’re right. The far-infrared style of sauna comes in a couple different forms. The most obvious one is the cabinet style that looks like a traditional Finnish sauna, but there’s ceramic tub emitters, or black carbon panels in the walls. All the ones I’ve seen have high magnetic fields and high electric fields.

There is one company that I measured with Brian Hoyer. We were together at a conference, and it was low in magnetic field, which was great. But the electric fields were through the roof. They were hundreds of millivolts into the volts range. It was like 10 volts. That’s a lot. So that’s my experience too, especially with the style that’s a little more portable, where your head sticks out.

So, they all have issues. Even the ones where they’ve managed to minimize the amount of magnetic field, they all seem to have electric field issues. Furthermore, they don’t offer any protection from the ambient electromagnetic stress that’s in the environment.

That’s why, for example, one of the products that I offer has a Faraday liner system that protects you from the ambient electric field. I worked really hard to provide that sort of solution. You don’t see that in any of these infrared products, or Finnish saunas either, but I don’t like to disparage any companies. I think there are some great products out there.

At the end of the day, I think if you sweat, and you get that sweat response, you get that elevated core temperature increase, you’re getting great benefit. But to be exposed to the oxidative stress of EMF during the session, for me, it’s not ideal. That would be like meditating in a polluted environment.”

The Benefits of Photobiomodulation

Photobiomodulation (PBM) is a fancy term for ascribing the biological benefits of light exposure to the human body and optimizing that. Richards further defines PBM as “the use of near-infrared light to heal and repair degenerate and damaged tissue and cells, and also optimize healthy tissue.”

The reason this is so important is because most people in the West spend woefully little time outside in the sun, and when they do, they typically wear shirts and pants. There is no doubt in my mind that this is a prescription for health disaster. You cannot violate one of our most pervasive ancestral practices, which is being outside regularly for long periods of time, without significant biological consequences.

To get photobiomodulation benefits from your sauna, it needs to use incandescent heat lamps that produce the majority of the heat as near- and mid-infrared, and a significant percentage of near- and mid-infrared frequencies, which is what SaunaSpace provides.

Near-Infrared Produces Subcellular Melatonin

As mentioned, 43% of the light coming from the sun is near-infrared, and a key benefit of near-infrared is that it increases melatonin in your mitochondria (subcellular melatonin). In the past, we thought almost all melatonin was produced in your pineal gland, but that’s actually only 5% of your body’s melatonin production; 95% of it occurs in your mitochondria, in response to near-infrared.

I believe this is the biggest benefit of using a PBM-capable sauna, as it will radically decrease oxidative stress, thereby lowering your risk of most chronic diseases. So, not only are you getting the detox and heat shock proteins that you get from any sauna, but a near-infrared sauna will also boost your mitochondrial function and energy level, and decrease damage to your cells, DNA, cell membranes, proteins and stem cells.

In addition to being a direct scavenger of free radicals, melatonin also catalyzes the production of other antioxidants, such as glutathione peroxidase, glutathione reductase, catalase and superoxide dismutase, all of which quench oxidative free radicals in your mitochondria. As discussed in the interview, near-infrared also structures the water around your cells, which is another phenomenal benefit. Richards adds:

“It’s a question of more bang for your buck. It’s the dual therapy together. We don’t have to belabor necessarily the benefit of sauna. It’s essentially increasing your health span. [It] increases the years of your life that you’re really healthy and it reduces your risk of dying of all things. So, it’s really great, and everybody should be doing sauna.

But then if you look at photobiomodulation … you’re using [near-infrared] light to heal damage and also optimize what’s there. If you look at the spectrum of the sun, 43% is near-infrared. If you add in red, over 50% is in this photobiomodulation range. That photobiomodulation is light controlling biology, but in this case, it’s all about near-infrared light activating healing and repair biology in the body …

It’s repairing damaged tissue. It’s improving protein function. It has antiaging effects in the cells in the DNA and the epigenetics, and it’s boosting and modulating the immune system. People are using it for inflammation reduction, for inflammation reduction.

So, if you look at the list of photobiomodulation [benefits] and the list of sauna [benefits], there’s so much overlap that it’s like, wow, these are probably the two most powerful things you could do for your health.

Especially here in the Northern hemisphere in the Western culture, we have the highest incident of cardiovascular disease, cancer … neurodegenerative diseases like MS, Alzheimer’s and dementia. Both of these therapies, this near-infrared therapy and the sauna therapy, appear to be quite beneficial for neurodegenerative diseases … So, why would you not do sauna that way?

It comes down to the form of the light. A couple other things to note about sunlight: It’s not just that a majority is near-infrared. It’s also not so much far-infrared. If you look at the spectrum of the sun, it’s only about 3% far-infrared. So, we don’t have much historical exposure to it.

One could argue, maybe from an evolutionary perspective, that’s why our mitochondria have not evolved to harness that. They’re designed to harness the No. 1 stimulus, which is the near-infrared portion.”

The SaunaSpace Light Spectrum

The bulbs used in the SaunaSpace saunas are 250 watt incandescent thermal light bulbs that put out 39% near-infrared, which is close but not identical to what you get from sunlight. There’s no blue light, no ultraviolet and very little red. So, most of the light is in the near-infrared and mid-infrared (about 40% each), plus 15% far-infrared.

Near-Infrared Penetrates Far Deeper Into Your Body

While one of the selling points of infrared saunas is that far-infrared penetrates deeper into your body, this actually isn’t the case. Near-infrared has far greater penetration power. Richards explains:

“The radiant heat benefits come from the body absorbing light through water absorption. Water absorption starts in near-infrared at 980 nanometers at the first overton of water, but then increases very quickly, so that once you’re into the mid-infrared spectrum, 1,500 to 3,000 nanometers or so, you’re getting strong water absorption. That’s a really effective way to radiantly heat the body …

Infrared A, aka, near-infrared, is much better for heating biological tissue because of tissue penetration. That’s because water begins to absorb light in the near-infrared region, but not a 100%. As you proceed into the mid-infrared and the far-infrared, water absorption increases. One of the protective mechanisms of our body is the chromophore, that is, water. It absorbs light in different ways.

Near-infrared light tends to penetrate several inches into the body. There’s actually one NASA study that showed water-filtered near-infrared penetrated like 20 centimeters into the body — 5, 6 or 7 inches. But on average, it’s several inches of penetration.

Once you get out to this long wavelength, low energy infrared called far-infrared, which starts at about 3,000 and greater nanometers, the tissue penetration is a fraction of an inch. It’s a millimeter or a few millimeters.

We’re talking about the average photons that go into the body. So, with near-infrared, on average, there are some photons that are absorbed by water in the skin, but then others go in and get absorbed by water in the liver, deep in the body. Others hit the mitochondrial light receptor protein and activate photobiomodulation.

So, every second that you’re exposed to millions of near-infrared photons, you’re getting a radiant, deeper penetrating heat that heats you from within and raises core body temperature more quickly. Because you’re not just relying on the hot air around you.

The most effective way to heat biological tissue is using a near-infrared centric light source … and using light to heat the body via radiant heating will always be more efficient than using just hot air or contact with water, like a hot tub or a bath … And, I would say you don’t get photobiomodulation from far-infrared wavelengths, period. There’s no photobiomodulation effect. It’s just heat.”

Basic Recommendations

Classical Finnish saunas are typically heated to 170 degrees F. or higher. An infrared sauna will rarely get that high, however, which means you may need to stay in a bit longer in order to get a good sweat.

A benefit of SaunaSpace’s near- and mid-infrared bulbs is that you’re heating up from deeper within, so the air temperature doesn’t need to be as high as a traditional sauna in order for you to sweat. Richards recommends starting out with a four-bulb system and build up from there with an additional two-, three- or four-bulb panel as you acclimate.

“The core panel is four 250-watt bulbs. That’s 1,000 watts. We’re bringing back a three-bulb system which would make it 1750 watts when combined with the four-bulb system. This is about 14.5 amps. It’s just under the 15-amp threshold for the standard household breaker. So, the seven-bulb system can be plugged in anywhere, more or less, in any standard home electrical circuit.

You could potentially use an eight-bulb system, but it requires a 20-amp dedicated circuit. That’s not so common throughout homes. You see that in kitchens and baths. You can swap [the circuit] out … but again, it’s also something that you can achieve through just staying in a little longer.”

Two ways to check whether your sauna is hot enough are:

• Measure your water loss by weighing yourself, naked, before and after the sauna. A 1- to 2-pound loss is normal
• Take your oral temperature right after your sauna. A 3- to 5-degree increase from baseline is good, or somewhere in the 101- to 103-degree range

Richards recommends staying in the sauna for 20 to 30 minutes, or until you reach subjective fatigue, which is a sign that you’ve maxed out the benefits you’re going to get. It’s not about reaching a point of suffering — just that point where you’re feeling mildly anxious and tired and want to get out.

As for the frequency, research has consistently shown that it’s dose-dependent, so the more often you do it, the greater the benefits. The sweet-spot seems to be right around four times a week, because you’ll also be losing minerals along with toxins. So, you need to rehydrate and replenish those minerals.

How to Make Your Own Sauna

If you already have an infrared sauna, you can turn it into a near-infrared one by removing the bench and installing the SaunaSpace bulb panels. I described how to do this in “The Stunning Health Benefits of Sauna Therapy.”

“You can also do that in any enclosed space, such as a small closet,” Richards says. “We offer a shower conversion kit. It really doesn’t matter what the enclosure is. It is just a space that needs to be enclosed, the smaller, the better, as long as it’s big enough to allow for the 2-foot clearance from the bulbs and, ideally, the ability to rotate.

Our panels are about 9 inches deep plus 2 feet of clearance from the chest to the panel. So, you need something that’s at least 4 feet deep at the minimum.

That’s why it’s really nice to take the bench out in the standard far infrared sauna and either get one of our stools or purchase a seat of your own, and do the near-infrared sauna protocol, which is a quarter turn rotation about every five minutes.”

To learn more about the health benefits of sauna, the SaunaSpace light technology and the dangers of EMF, check out SaunaSpace.com‘s learning space and research archive.

Temperature Matters

The key to achieving the first two benefits — detoxification and heat shock protein amplification — is to make sure the sauna is hot enough. Most all of the research documenting sauna benefits comes from Finland, which uses traditional saunas where the temperatures range from 160 to 200 degrees Fahrenheit.

Most saunas sold in the U.S. are far-infrared (IR) which are considerably more energy efficient than a Finnish sauna and typically less expensive. However, there are several problems with most far-IR saunas. When they were initially introduced in the U.S., most were very high in magnetic and electric fields (EMF).

Over time, most of the far-IR sauna companies have been able to radically reduce the magnetic fields but it is the rare company that has eliminated the electric fields. Buyer beware, as there are a number of popular IR saunas today that are very high in both magnetic and electric fields. These tend to be the smaller, typically portable units where your head sticks out.

But there’s an even more important consideration with far-IR saunas than EMF, and that’s the temperature they can reach. It is the rare far-IR sauna that is able to go higher than 140 degrees F., and this simply isn’t hot enough to provide the detox and heat shock protein benefits achieved at 160 degrees F.

So, my recommendation is to steer clear of buying most far-IR saunas. There are some that would reach the temperatures needed and are essentially EMF-free, but there is an even better approach that I will discuss in the following sections.

If you have already purchased a far-IR sauna, there’s no need to worry or have buyer’s remorse. You can easily modify your sauna to be one of the best in the world. Before I get into that though, I’ll summarize some of the information Patrick shares in her interview.

The Duration of Each Session Matters

The duration of each session is also important, with respect to the robustness of the results. Patrick cites research from Finland, which used traditional Finnish sauna at 174 degrees F., with a humidity level between 10% and 20%.

Using this kind of sauna, people who used the sauna four to seven times a week, for 19 minutes or longer, were 50% less likely to die from cardiovascular-related disease. Those whose sessions averaged only 11 minutes only reduced their cardiovascular death risk by 8%, which is no minor difference. So, the sweet spot appears to be about 20 minutes, four to seven times a week, in a 174-degree F. sauna.

Basic Guidance for Sauna Use

While sauna use is safe for the vast majority of people, it’s best to discuss it with your doctor before starting. Some basic guidance for safe sauna use include:

How Photobiomodulation (PBM) Can Boost Sauna Benefits

As mentioned, photobiomodulation or PBM can turn the benefits of sauna therapy up another notch. PBM is simply the term used to describe the use of light therapy to achieve beneficial biological effects. Typically, this involves using red and IR wavelengths with enough energy to improve health. The primary benefits of PBM are twofold. 

The traditional view is that the frequencies activate cytochrome IV in the mitochondria to improve the efficiency of ATP generation. Recently, it became clear that red and near-IR light also increase melatonin production in the mitochondria, which decreases oxidative stress and secondary free radical damage in the mitochondria.

While traditional and some far-IR saunas can provide outstanding benefits in detox and heat shock protein generation, neither of them provide the light wavelengths to generate PBM benefits.

Fortunately, there is a type of sauna that can provide all three benefits, and that would be a sauna that uses incandescent heat lamps that produce the majority of the heat as mid-IR, and a significant percentage of near- and mid-IR frequencies capable of producing PBM benefits.

While you can create your own bulb system to build this kind of sauna, there is a company that has done the hard work and created panels with four bulbs that are of the highest quality, and have a guard over the bulbs that prevent glass from injuring you in the event that a bulb might break.

Breaking bulbs during use is usually the result of spilling some kind of liquid on the hot bulbs. This could be your sweat or a drink that might be in the sauna. The shields also protect you from serious burns if you accidentally touch the hot bulbs. You will still get a burn on the shield, but it will be far less severe. The name of the company that provides these bulb units is Sauna Space.¹

Sauna Space does sell complete saunas, but in their current configuration, I believe there is room for improvement. The one with a faraday cage that blocks external EMFs is $ 5,000 and the one without that shielding is about $ 3,000. They are not as elegant as most IR saunas and most people have to bend over to fit in them, but the major problem is that they aren’t hot enough. The current configuration offers one set of four bulbs, which will get the temperature to around 125 degrees F.

While I have been enamored with Sauna Space for some time, I want to express my gratitude to Ari Whiten in helping me understand one of their main flaws, their single panel saunas don’t get hot enough. Fortunately, the simple fix is to merely double the number of bulbs from four to eight.

I’ve shared my thoughts with Brian, the founder of SaunaSpace, and they’re currently developing an eight-bulb system that meets this specification. I’ve been using a prototype for nearly a year and the sauna can easily get up to 200 degrees F.²

This is far too high for most, as unlike conventional or far IR saunas, these frequencies can actually penetrate a few inches into your body, and heat you up far more effectively than either of the other types of sauna. Most people achieve the optimal heat shock protein and detox benefits by starting at 140 degrees and building up a tolerance. Over a few weeks, you should be able to increase the temperature to 160 degrees F.

How Do You Know if the Sauna Is Hot Enough?

How can you determine the air temperature of your sauna? You can get an analog thermometer that goes up to 180 degrees F. for about $ 10 on Amazon. Once you know the temperature of your sauna, you will be able to correlate it with the biologic reactions that indicate you have achieved a high-enough core body temperature.

The first and most important criteria is to make sure you are sweating enough. The easiest way to do this is to accurately measure your naked body weight before going into the sauna and then re-weigh yourself naked when you get out.

One pint of water (sweat) equals 1 pound. Depending on your size, you should lose 1 to 2 pints during the therapy. The most I have lost is 4 pints of water, which is half a gallon or two liters of water. This was before I had the temperature dialed in as that is too great a water loss. Ideally, you’ll want to lose between 1 and 2 pints of water (a drop of 1 to 2 pounds of bodyweight) during a session.

One of the things you can do about one hour before your sauna is drink a quart of water. It’s best to add some electrolytes. I also add a teaspoon of glycine powder.

The other biologic parameter you can measure is your body temperature. You can use a simple oral thermometer to measure your temperature before and immediately after the sauna. Your temperature should increase by 3 to 5 degrees F. If you meet the temperature and sweat criteria, your sauna is hot enough to detox and generate heat shock proteins.

Articles